15-pin mini D-SUB
Captive Combined
Signal Cable
Mac Adapter
(Not included)
15-pin mini D-SUB
Computer
Captive Combined
Signal Cable
Quick Start
To attach the MultiSync
®
M Series monitor to your system, follow
these instructions:
1. Turn off the power to your computer and MultiSync monitor.
2. If necessary, install the display card into your system. For more information,
refer to the display card manual.
3. For the PC: Connect the MultiSync M Series 15-pin mini D-SUB of the captive
combined signal cable to the connector of the display card in your system
(Figure A.1). Tighten all screws.
2
Figure A.1
For the Mac: Connect the MultiSync M Series Macintosh cable adapter (not
included) to the monitor connector on the Macintosh (Figure B.1). Attach the
15-pin mini D-SUB end of the captive combined signal cable to the Macintosh
cable adapter on the computer (Figure B.1). Tighten all screws.
NOTE: To obtain the MultiSync M Series cable adapter, call
NEC Technologies at (800) 820-1230.
Figure B.1
78133441
6/24/98, 7:50 AM
4
Содержание MultiSync M500
Страница 18: ...Notes 78133441 6 24 98 7 50 AM 18...
Страница 19: ...Notes 78133441 6 24 98 7 50 AM 19...