Specifications
14
Monitor
MultiSync
®
LCD
1525X
™
Notes
Specifications
Monitor
LCD Module
Diagonal:
15.0 inch
Active matrix; thin film transistor (TFT)
Viewable Image Size:
15.0 inch
liquid crystal display (LCD); 0.30 mm dot
Native Resolution (Pixel Count):
1024 x 768
pitch; 200cd/m
2
white luminence;
350:1 contrast ratio, typical
Input Signal
Video:
ANALOG 0.7 Vp-p/75 Ohms
Digital Input: TMDS
™
Sync:
Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Display Colors
16,777,216 colors
Depends on display card used.
Viewing Angle
Left/Right:
±
60
°
Up:
45
°
Down:
55
°
Synchronization
Horizontal:
24.8 kHz to 60.0 kHz
Digital Input: 24.8 kHz to 60.0 kHz
Range
Vertical:
56.2 Hz to 75.1 Hz
56.2 Hz to 75.1 Hz
Resolutions Supported
720 x 400*: VGA text
Some systems may not support
Resolution based on horizontal and
640 x 480* at 60 Hz to 75 Hz
all modes listed.
vertical frequencies only
800 x 600* at 56 Hz to 75 Hz
832 x 624* at 75 Hz
1024 x 768 at 60 Hz to 75 Hz .................. NEC cites recommended resolution at
75 Hz for optimal display performance.
Active Display Area
Horizontal:
304.1 mm/12.1 inches
Dependent upon signal timing used,
Vertical:
228.1 mm/9.1 inches
and does not include border area.
USB Hub
I/F:
USB Specification Revision 1.1
Port:
Upstream 2
Downstream 4
Load Current:
Maximum 0.5A per port
Power Supply
AC 100 – 240 V @ 50/60 Hz
Current Rating
0.75 A @ 100 – 120 V/0.45 A @ 220 – 240 V
Dimensions
370 mm (W) x 360 mm (H) x 158 mm (D)
14.6 inches (W) x 14.2 inches (H) x 6.2 inches (D)
Weight
4.5 kg
10.0 lbs
Environmental Considerations
Operating Temperature:
5
°
C to 35
°
C/41
°
F to 95
°
F
Humidity:
30% to 80%
Feet:
3,000m/10,000 Feet
Storage Temperature:
-10
°
C to +60
°
C/14
°
F to 140
°
F
Humidity:
10% to 85%
Feet:
9,500m/31,500 Feet
*
Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may
appear different. This is normal and necessary for all current flat panel technologies when displaying non-native
resolutions full screen. In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to
full screen, an interpolation of the resolution must be done.
NOTE: Technical specifications are subject to change without notice.
1525X.wpc
11/5/99, 12:56 PM
16