background image

`

PROFESSIONAL GRAPHICS PRODUCTS

LIMITED WARRANTY

NEC Technologies, Inc. (hereafter NECTECH) warrants this product to be
free from defects in material and workmanship under the following terms.

HOW LONG IS THE WARRANTY

Parts and labor are warranted for (1) One Year from the date of the first
customer purchase.

WHO IS PROTECTED

This warranty may be enforced only by the first purchaser.

WHAT IS COVERED AND WHAT IS NOT COVERED

Except a specified below, this warranty covers all defects in material or
workmanship in this product. The following are not covered by the
warranty:
1. Any product with is not distributed in the U.S.A., Canada, and Mexico

by NECTECH or which is not purchased in the U.S.A., Canada, and
Mexico from an authorized NECTECH dealer.

Authorized NECTECH dealers can be identified by an NEC window

decal. Any dealer which does not display this decal may be an unautho-
rized dealer. If you are uncertain as to whether a dealer is authorized,
please contact NECTECH at (708)-238-7764.

2. Any product on which the serial number has been defaced, modified or

removed.

3. Damage, deterioration or malfunction resulting from:

a. Accident, misuse, abuse, neglect, fire, water, lightning or other acts

of nature, unauthorized product modification, or failure to follow
instructions supplied with the products.

b. Repair or attempted repair by anyone not authorized by NECTECH.
c. Any shipment of the product (claims must be presented to the carrier)
d. Removal or installation of the product.
e. Any other cause which does not relate to a product defect.
f. Burns or residual images upon the phosphor of the tubes.

4. Cartons, carry cases, batteries, external cabinets, magnetic tapes, or any

accessories used in connection with the product.

WHAT WE WILL PAY FOR AND WHAT WE WILL NOT PAY FOR

We will pay labor and material expenses for covered items, but we will not
pay for the following:
1. Removal or installation charges.
2. Costs of initial technical adjustments (set-up), including adjustment of

user controls. These costs are the responsibility of the NECTECH dealer
for whom the product was purchased.

3. Payment of shipping charges.

a

consequential damages, so the above limitations and exclusions may not
apply to you.

HOW STATE LAW RELATES TO THE WARRANTY

This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
FOR ALL INFORMATION, TELEPHONE: 708-238-7764
NEC Technologies, Inc., 1255 Michael Drive
Wood Dale, IL 60191

HOW YOU CAN GET WARRANTY SERVICE

1. To obtain service on your product, consult the dealer from whom you

purchased the product, or ship it prepaid to any authorized NECTECH
service center.

2. Whenever warranty service is required, the original dated invoice (or a

copy) must be presented as proof of warranty coverage, and should be
included in any shipment of the product.

Please also include in any mailing, your name, address and a description

of the problem(s).

3. For the name of the nearest NECTECH authorized service center,

contact your dealer or NECTECH.

LIMITATION OF IMPLIED WARRANTIES

All implied warranties, including warranties of merchantability and fitness
for a particular purpose, are limited in duration to the length of this
warranty.

EXCLUSION OF DAMAGES

NECTECH’S liability for any defective product is limited to the repair or
replacement of the product at our option. NECTECH shall not be liable for:
1. Damage to other property caused by any defects in this product,

damages based upon inconvenience, loss of use of the product, loss of
time, commercial loss; or

2. Any other damages whether incidental, consequential or otherwise.

Some states do not allow limitation on how long an implied warranty
lasts and/or do not allow the exclusion or limitation of incidental or

Содержание MultiSync IDC-3000

























Отзывы: