English-17
English
VIDEO DETECT
Selects the method of video detection when more than one video inputs are connected.
FIRST: When current video input signal is not present, then the monitor searches for a video signal from the other
video input ports. If the video signal is present in another port, then the monitor switches the video source input port
to the new found video source automatically. The monitor will not look for other video signals while the current video
source is present.
NONE: The monitor will not search the other video input port unless it is turned on.
DP OUT MULTISTREAM
Selects DisplayPort mode.
CLONE: Sets SST (single-stream transport). Default is “CLONE”.
AUTO: Displays in SST (single-stream transport) or MST (multi-stream transport) mode. “AUTO” should be selected
when using MST (multi-stream transport).*
If multiple monitors are set to SST (single-stream transport), individual image is displayed at each monitor.
NOTE: When the monitor has no image, refer to Multiple monitors connection using DisplayPort (see page 12).
*: MST (multi-stream transport) and SST (single-stream transport) require the corresponding display card. Contact your dealer for limitations of this function.
MULTI PICTURE
Activates the MULTI PICTURE function and selects the priority (adjustable) screen.
Icon
Name
Off
Multi Picture is Off.
Left
2 split screen (Picture by Picture). Left hand side screen is selected.
Right
2 split screen (Picture by Picture). Right hand side screen is selected.
Main
Picture in Picture. Main screen is selected.
Sub
Picture in Picture. Sub screen is selected.
NOTE: When “Left”, “Right”, “Main” or “Sub” is selected, only the selected screen is available to be adjusted.
PICTURE PATTERN
When “Left” or “Right” is selected in MUTI PICTURE, selects the size of the picture.
AUTO: Shows 2 screens based on the INPUT RESOLUTION and EXPANSION settings for the priority (adjustable)
screen selected in MULTI PICTURE.
CENTER: Splits 2 screens divided evenly from the center.
When “Main” or “Sub” is selected in MUTI PICTURE, selects the position of the sub screen.
LEFT: Sub screen’s start position is left-bottom side of the screen.
RIGHT: Sub screen’s start position is right-bottom side of the screen.
RESPONSE IMPROVE
Turns the Response Improve function on or off. Response Improve may reduce blurring that occurs in some moving
images.
OFF TIMER
Monitor will automatically power down when you have selected a pre-determined amount of time.
Before powering off, a message will appear on the screen asking if you want to delay the turn off time by 60 minutes.
Touch any OSD key to delay the power-down time.
POWER SAVE TIMER
POWER SAVE TIMER allows the monitor to turn off automatically after continuing power saving mode for 2 hours.
