English-16
PICTURE PATTERN
Selects split screen mode. You can select up to 4 split screen types.
NOTE:
This function is only available when MULTI PICTURE is “ON”.
Only 2 split screen mode, you can choose AUTO or CENTER display mode.
2 split screen (CENTER)
Splits 2 screens divided evenly from the center.
2 split screen (AUTO)
Shows 2 screens based on EXPANSION setting of the adjustable screen.
3 split screen
Shows 3 screens split as follows: LEFT, CENTER, RIGHT.
Shows 3 screens split as follows: LEFT, TOP-RIGHT, BOTTOM-RIGHT.
Shows 3 screens split as follows: TOP-LEFT, BOTTOM-LEFT, RIGHT.
4 split screen
Shows 4 screens split as follows: TOP-LEFT, BOTTOM-LEFT,
TOP-RIGHT, BOTTOM-RIGHT.
ACTIVE PICTURE
Selects the adjustable screen. After selecting, set the signal input. Then set each OSD settings for the adjustable
screen.
NOTE:
For setting the other screen, please see the “Using Multi Picture function” (see page 24).
OFF TIMER
Monitor will automatically power down when you have selected a pre-determined amount of time.
Before powering off, a message will appear on the screen asking if you want to delay the turn off time by 60 minutes.
Touch any OSD key to delay the power-down time.
POWER SAVE TIMER
POWER SAVE TIMER allows the monitor to turn off automatically after continuing power saving mode for 2 hours.
LED BRIGHTNESS
You can adjust the blue LED brightness.
DDC/CI
This function allows the DDC/CI function ON or OFF.
USB POWER
Selects a power relation of USB.
AUTO:
Power is supplied to USB downstream port depending on related power condition.
ON:
Power is always supplied to USB downstream port even when in power save mode or power OFF.
NOTE:
Power consumption depends on connected USB even when a monitor’s power is off.
FACTORY PRESET
Selecting Factory Preset allows you to reset all OSD control settings back to the factory settings. Individual settings
can be reset by touching the “
/RESET” Key.