NEC MultiSync C750Q Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 93

background image

English−6

CAUTION

1

REQUIRED

DO NOT TOUCH

WITH WET HANDS

UNPLUG THE

POWER CORD

HAZARDOUS

VOLTAGE

Handling the power cord.

Handle the power cord with care. Damaging the cord could lead to fire or electric shock.

• When connecting the power cord to the product’s AC IN terminal, make sure the connector is

fully and firmly inserted.

• Fasten the power cord to the product by attaching the screw and clamp to prevent loose

connection. (Recommended Fasten Force: 120 - 190 N•cm).

• Do not connect or disconnect the power cord with wet hands.

• When connecting or disconnecting the power cord, pull the power cord out by holding onto its

plug.

• When cleaning the product, for safety purposes, unplug the power cord from the power outlet

beforehand. Regularly dust off the power cord by using a soft dry cloth.

• Before moving the product, make sure the product power is off, then unplug the power cord

from the power outlet and check that all cables connecting the product to other devices are
disconnected.

• When you are not planning to use the product for an extended period of time, always unplug the

power cord from the power outlet.

• This equipment is designed to be used in the condition of the power cord connected to the earth.

If the power cord is not connected to the earth, it may cause electric shock. Please make sure the
power cord is earthed properly.

2

PROHIBITED

REQUIRED

Do not bind the power cord and the USB cable. It may trap heat and cause a fire.

3

PROHIBITED

Do not connect to a LAN with excessive voltage.

When using a LAN cable, do not connect to a peripheral device with wiring that might have excessive
voltage. Excessive voltage on the LAN port may cause an electric shock.

4

PROHIBITED

Do not climb on the table where the product is installed. Do not install the product on a wheeled table
if the wheels on the table have not been properly locked. The product may fall, causing damage to
the product or personal injury.

5

REQUIRED

Installation, removal, and height adjustment of the optional table top stand.

• When installing the table top stand, handle the unit with care to avoid pinching your fingers.

• Installing the product at the wrong height can cause tipping.

Please install your product at proper height to prevent personal injury or damage to the product.

6

PROHIBITED

Do not push or climb on the product. Do not grab or hang onto the product.

The product may fall, causing damage to the product or personal injury.

7

PROHIBITED

Do not impact the LCD panel surface, it can cause serious damage to the product or personal injury.

«
...
8
9
10
11
12
...
»

Содержание MultiSync C750Q






























































































Отзывы:

Нет отзывов

Похожие инструкции для MultiSync C750Q

Бренд: B&G Страницы: 23

Be Strong. NV915

Бренд: Nautilus Страницы: 30

Бренд: MIP Страницы: 41

ProLite T1531SR

Бренд: Iiyama Страницы: 1

Бренд: NEC Страницы: 2

Бренд: Siko Страницы: 12

Бренд: Environnement Страницы: 196

Бренд: Omron Страницы: 36

Бренд: 2E GAMING Страницы: 36

Бренд: Sigma Страницы: 32

MONITOUCH V808 CH Series

Бренд: Fuji Electric Страницы: 16

Бренд: Packard Bell Страницы: 56

InView 2706-PENETx2-SC

Бренд: Spectrum Controls Страницы: 8

Бренд: Microtek Страницы: 23

Бренд: Uniden Страницы: 24

Бренд: Megellan Страницы: 6

Бренд: Tandy Страницы: 45

Бренд: Raymarine Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды