NEC MT1065 - MultiSync XGA LCD Projector Скачать руководство пользователя страница 78

Страница: 78 / 94

Information about Upgrading this Software

Please see the service page for NEC projectors (http://www.nec-pj.com/) for information

about software upgrades of NEC Projector User Supportware (i.e., Dynamic Image Utility,

Viewer PPT Converter, and Image Express Utility).

Projector "Easy Connection" Settings

Viewer PPT Converter 2.0

Converts files created with Microsoft PowerPoint 95/97/2000/2002 to an indepen-

dent index format with a simple operation to enable direct playback with the viewer

function of the projector.

When using Microsoft PowerPoint 2000/2002, Viewer PPT Converter 2.0 can be started

from PowerPoint (by means of add-in registration to PowerPoint).

Image Express Utility 1.0

Using a network environment

(*2)

, this program enables the screen image displayed by

the personal computer to be sent to the projector and then projected to a screen.

Two methods are available for sending the screen image to the projector. "Continuous

Transmit" automatically sends the screen image of the personal computer at a fixed

interval. "Single Frame Transmit" sends the screen image by clicking the screen button

(or pressing a key).

*1: Please purchase a commercially available PCMCIA Type 2 (ATA specification) flash memory card.

*2: Please check the network environment on the next page.

*3: USB cable connection is supported by the MT1065 and MT1060 only.

1. Introduction

Software that can abbreviate the troublesome LAN settings that are used when

connecting the PC and projector via a wireless LAN can be downloaded from our

website at no charge. After you have installed the software from the supplied

CD-ROM to your PC, visit our website to update the information.

• From the Advanced menu, select [Projector Options]

씮

[LAN Mode]

씮

[Network

Type]

씮

[Mode]

씮

[Easy Connection] on the projector. (No setting for IP address and channel

are required.)

• Before executing Easy Connection using Image Express Utility, visit our website to check

the information.

• Easy Connection is available on Windows 2000 and XP.

• Easy Connection is available only when both PC and projector use the NEC optional

wireless cards.

• Easy Connection is not available on Dynamic Image Utility included on the supplied

CD-ROM.

Содержание MT1065 - MultiSync XGA LCD Projector































































































Результаты поиска

Содержание MT1065 - MultiSync XGA LCD Projector

Отзывы:

Похожие инструкции для MT1065 - MultiSync XGA LCD Projector

Бренды по названию

Популярные бренды

NEC MT1065 - MultiSync XGA LCD Projector, Руководство пользователя

Результаты поиска

Содержание MT1065 - MultiSync XGA LCD Projector

Отзывы:

Похожие инструкции для MT1065 - MultiSync XGA LCD Projector

Бренды по названию

Популярные бренды