![background image](http://html.mh-extra.com/html/nec/mobilepro-800/mobilepro-800_user-manual_248870070.webp)
Using the NEC MobilePro 4-7
Follow these steps to enable the Suspend switch.
1.
Tap Start, Settings, then select Control Panel.
2.
Double tap on the MobilePro Settings icon to launch the
dialog box shown in the following figure.
Be sure to select the “LCD Suspend/Resume” tab.
Power off settings
3.
Select either “Enable suspend while on Battery Power” or
“Enable suspend while on External Power,” or both to
enable the Suspend switch.
Note:
Your NEC MobilePro will not
automatically suspend while on battery power
during synchronization, unless the battery charge
is at a very low status. You may want to connect
your MobilePro to an AC power source before
synchronizing with your host PC.