NEC ML440 Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 54

background image

Unregister and delete the selected extension from the AP20.

Delete Extension(s)

Enable the registration mode in the AP20 for the selected handsets. The
registration mode stays active for about 4 minutes so you have time to start the

Register Handset(s)

registration process in the ML440 handset. See Step 6. Register the ML440
handsets with the AP20 and the DSX . on page 8 in the Installation Checklist
for more.

Deregister the selected handsets. This does not delete the extensions from the
AP20 - it only deregisters (disables) them.

Deregister Handset(s)

Table 3: Servers

Use the Servers screen to assign the AP20 to the DSX, select the DTMF signaling method, and choose an
audio codec.

Enter the LAN IP address of the DSX system appended by the SIP port. Check
System: VoIP: Setup: SIP Ports: SIP UDP Port (1801-01) to see which port you

SIP Server:

should use. For example, 172.16.3.3:5060 specifies the DSX system at IP address
172.16.3.3 and uses SIP port 5060.

This is the frequency with which the AP20 Access Point reregisters with the
DSX system. Leave this value at default (300 seconds).

Reregistration time(s):

Use this option to select the method the AP20 Access Point uses to convey
DTMF information to the DSX system. Choose RFC 2833.

DTMF Signaling:

Only G711U should be available. Delete all other codecs from the list. You'll
need to create a unique Profile in DSX that only offers G.711 @ 20ms. See Step
5. Program the DSX on page 8 in the Installation Checklist for more.

Codec Priority:

These controls modify the Codec Priority list. Make sure the list only offers
G711U.

Up, Down, Reset
Codecs, Remove

Use this option to add an additional server (DSX system). Adding a server leaves
the existing server unchanged. An AP20 Access Point can be assigned to only
one DSX system.

Add Server:

Click this option to remove (delete) the server on-screen. Removing a server
also deletes all the ML440 extensions associated with it.

Remove Server:

42 | DSX |

ML440 Wireless IP DECT Quick Reference Guide

XML to PDF by RenderX XEP XSL-FO Formatter, visit us at

http://www.renderx.com/

«
...
40
41
42
43
44
...
»

Содержание ML440























































Отзывы:

Нет отзывов

Похожие инструкции для ML440

Бренд: Eaton Страницы: 44

Бренд: O2 Страницы: 36

Бренд: BENQ-SIEMENS Страницы: 132

Бренд: Talkswitch Страницы: 83

Бренд: Diamond Tech Страницы: 38

Бренд: Caliber Страницы: 10

Бренд: Sonim Страницы: 66

Бренд: Yealink Страницы: 2

Бренд: Aastra Страницы: 40

Бренд: i.safe MOBILE Страницы: 88

Бренд: Proolin VoIP Tech Страницы: 25

Бренд: Chima Страницы: 105

Бренд: NEFFOS Страницы: 69

Бренд: PCD Страницы: 16

Бренд: NUU Mobile Страницы: 16

Бренд: AU Страницы: 55

Instinct HD SPH-M850

Бренд: Samsung Страницы: 242

Intercept SPH-M910

Бренд: Samsung Страницы: 233

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды