English-14
AUTO FINE (Analog input only)
This function automatically and periodically adjusts the “FINE” setting for change in signal condition.
This function adjusts approximately every 33 minutes.
EXPANSION
Sets the zoom method.
FULL:
The image is expanded to full screen regardless of the resolution.
ASPECT:
The image is expanded without changing the aspect ratio.
OFF:
The image is not expanded.
CUSTOM:
Refer to the Advanced OSD menu for detailed instructions.
SHARPNESS
This function is digitally capable of keeping a crisp image at any time. It is continuously adjustable to get as distinct or
as soft an image as your prefer and is set independently for different timings.
PICTURE MODE
PICTURE MODE
Change to a picture mode which is most suitable for the type of content that is shown. You can choose one of two
possible PICTURE MODES. See Advanced OSD menu Tag1 PICTURE MODE (page 19) and “Using the PICTURE
MODE function” (page 17) for more information.
Tools
PIP MODE
Select PIP MODE, OFF/PIP/PICTURE BY PICTURE - ASPECT/PICTURE BY PICTURE - FULL.
You can select individual PICTURE MODE in each screen.
This display can display 2 inputs at a time.
PIP*
OFF
PICTURE BY
PICTURE - ASPECT*
PICTURE BY
PICTURE - FULL*
IMAGE ROTATION: ON / SUB IMAGE ROTATION: ON
PIP*
OFF
PICTURE BY
PICTURE - ASPECT*
PICTURE BY
PICTURE - FULL*
PIP INPUT
Selects the PIP input signal.
PIP LEFT/RIGHT
Controls the horizontal position of the Picture in Picture window in PIP mode.
PIP DOWN/UP
Controls the vertical position of the Picture in Picture window in PIP mode.
PIP SIZE
Selects the size of the sub-picture used in PIP mode.
USB SELECTION
Change USB upstream input associated with the current display input, 1 or 2. When connecting a computer to each
of the upstream ports, the monitor's USB downstream ports can be used by selecting this setting for the current input
signal.
You can change the active display and upstream USB port combination by using the Input button (see page 12).
You can set the USB selection for each input signals in Advanced menu (see page 22).
When using only one upstream port, the connected upstream port is used by default.
NOTE:
To avoid data loss, before changing USB upstream ports, ensure that no USB storage devices are in use by
the operating system of the computer attached to the USB upstream port.
* “ADJUST” setting will result the following cases depending on the setting conditions:
Setting for only one screen: the setting result is refl ected on the corresponding Window (Main or Sub).
Individual setting for each screen: the setting result is refl ected on Main Window only. Then Warning (6-AXIS SUB:OFF) will appear on screen.
Same setting for both screens: the setting result is refl ected on both Main and Sub Windows.
Содержание MD242C2
Страница 1: ...MD242C2 INSTALLATION MAINTENANCE GUIDE...
