English-9
English
Figure E.1
Power switch
Figure C.3
Power Cord
Mini DisplayPort
Cable
HDMI Cable*
1
USB Cable
DisplayPort Cable*
1
DVI Cable
(MD242C2)
(MD302C4)
Power Cord
DVI-D Cable
D-SUB Cable
USB Cable
DisplayPort Cable
7. Slide down the cable cover (
Figure D.1
).
8. Connect one end of the power cord to the AC inlet on the back of the monitor and the other end to the power outlet.
NOTE:
Please refer to the
Caution
section of this manual for proper selection of an AC power cord.
Figure D.1
9. Turn on the monitor with power switch on the top (Portrait) or left side (Landscape) of the
monitor (
Figure E.1
). Turn on the computer.
10. No Touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup
for most timings. For further adjustments, use the following OSD controls:
• AUTO CONTRAST (Analog input only)*
• AUTO ADJUST (Analog input only)*
Refer to the
Controls
section of this User’s Manual for a full description of these
OSD controls.
NOTE:
If you have any problems, please refer to the
Troubleshooting
section of this Manual.
Raise and Lower Monitor Screen
The monitor may be raised or lowered in either Portrait or Landscape mode.
To raise or lower the screen, place hands on each side of the monitor and lift or lower to the
desired height (
Figure RL.1
).
NOTE:
Handle with care when raising or lowering the monitor screen.
Figure RL.1
* Only for MD242C2.
*
1
Cable not included.