background image

19

Perform Windows setup.

Windows Setup

Read "

 

Windows Setup" (p.4) and perform Windows Setup.

Next, continue to "Do again the settings which you did after your purchase".

Do again the settings which you did after your purchase

The settings which you did after purchasing your computer is lost once recovery has 

started. Do the settings again. If you want to use some peripherals, connect them and 

do the settings again. Do also network settings again.

Next, continue to "After Recovery".

After Recovery

The applications which you installed after your purchase cannot be recovered. 

Reinstall them if needed.

That is all for Windows 7 recovery.

Appendix

For comments, please refer to the followings.

Comments

*

8  : Equipped with an enhanced version of Intel SpeedStep

®

 Technology.

*

10  : Supports Hyper-Threading technology.

*

15  : 2 GB memory, 500 GB HDD, DVD SuperMulti drive settings (keyboard and mouse not 

included).

*

16  : Not including any other prongs except for the rubber feet when the machine is stood 

vertically.

*

22  : The maximum values are calculated with expansion ports and slots fully occupied, in 

addition to the full settings (display not included) available in the selection menu.

*

28  : The 32-bit version of the OS cannot utilize the entire capacity even with 4 GB or more of 

RAM. The usable capacity is approx. 3 GB. Furthermore, depending on the configuration 
the usable RAM volume may vary.

Windows Setup

When Windows setup has completed, turn the power OFF and then do settings to 
your needs.

Depending on your usage environment, the drive letter or the path assigned before 
recovery might be different. In that case, change the allocation.

3

Specifications

Model name

MC32M/B-F
MG32M/B-F

MC33L/B-F
MG33L/B-F

CPU

Intel

®

 Core

TM

 i5-3470 

processor

*8

Intel

®

 Core

TM

 i3-3220 

processor

*8*10

Maximum memory (RAM)

8 GB [DIMM (4 slots)]

*28

Power

Compatible with AC 100 V-240 V ± 10%, 50/60 Hz (supported 
input waveform: sine wave only) or your region's specifications 
[the included power cord is adapted to suit your region's 
specifications. For use outside your region, another power cord 
will be required.]

Power 
consumption
(Maximum 
configuration

*22

)

Windows 7 
Professional 
32 bit

Maximum approximately 149 W Maximum approximately 135 W

External dimensions (body)

*16

98 (W) × 385 (D) × 343 (H) mm
(stabilizers not included),
220 (W) × 385 (D) × 343 (H) mm
(stabilizers included)

Weight (body)

*15

Approx. 8.2kg

NEC_Mate.fm  Page 19  Monday, November 12, 2012  3:39 PM

Содержание MB





















Отзывы: