background image

63

7. Appendix

TO: NEC or NEC's Authorized Service Station:

FM:

(Company & Name with signature)

Dear Sir (s),

I would like to apply your TravelCare Service Program based on attached registration and qualification sheet and agree with your

following conditions, and also the Service fee will be charged to my credit card account, if I don't return the Loan units within the

specified period. I also confirm following information is correct.     Regards.

Application Sheet for TravelCare Service Program

P-1/    ,

Country,

product purchased :

User's Company Name :

User's Company Address :

Phone No., Fax No. :

User's Name :

User's Address :

Phone No., Fax No. :

Local Contact office :

Local Contact office Address :

Phone No., Fax No. :

User's Model Name :

Date of Purchase :

Serial No. on cabinet :

Problem of units per User :

Required Service :

(1) Repair and Return

(2) Loan unit

Requested period of Loan unit :

Payment method :

(1) Credit Card

(2) Travelers Cheque

(3) Cash

In Case of Credit Card :

Card No. w/Valid Date :

Date:      /       /       ,

Содержание LT30 - INSTALLTION GUIDE









































































Отзывы: