7. Setting the LAN Setting of Projector
28
Setting LAN
Select "Profiles".
"Profile 1" or "Profile 2" can be stored in the memory of the projector as the setting of LAN when
the LAN port of the projector is used.
<1> Press the
button once to highlight the "Profiles" field and press the
button.
<2> Use the
button to highlight "Profile 1" or "Profile 2", and press
the
button.
Set "DHCP".
Check this check box if the network to which the projector is to be connected automatically
assigns the IP address via the DHCP server.
<1> Press the
button once to highlight the "DHCP" check box and press
the
button.
A check mark will be placed.
•
To clear the check box, press the
button once again.
•
If "DHCP" is checked, move the highlight to "Reconnect" and press the
button
after making "DNS Configuration".
•
If "DHCP" is not checked, input "IP Address", "Subnet Mask", "Gateway", and "DNS Con-
figuration" as necessary. After each item has been set, move the highlight to "Reconnect"
and press the
button.
1
2
Содержание LT265 - INSTALLTION GUIDE
Страница 6: ...4...
