NEC LT180 - LT 180 XGA DLP Projector, Руководство пользователя

Страница: 25 / 73

E-18
AUDIO IN
L R
AUDIO OUT
L R
VIDEO OUT
S-VIDEO VIDEO
PC CONTROL
COMPONENT IN
COMPUTER IN
VIDEO IN AUDIO IN
AUDIO OUT
S-VIDEO IN
R
Cr/Pr
Cb/Pb Y
L
AUDIO IN
AC IN
MONITOR OUT
S-VIDEO IN
AUDIO IN
VIDEO IN
Connecting Your VCR or Laser Disc Player
Audio equipment
Use S-Video or RCA cables to connect your VCR, laser disc player or document camera to your projector.
To make these connections, simply:
1. Turn off the power to the projector and VCR, laser disc player or document camera.
2. Connect one end of your RCA or S-Video cable to the video output connector on the back of your VCR or
laser disc player, connect the other end to the VIDEO IN or S-VIDEO IN on your projector. Use an audio cable
to connect the audio from your VCR or laser disc player to your audio equipment (if your VCR or laser disc
player has this capability). Be careful to keep your right and left channel connections correct for stereo sound.
3. Turn on the projector and the VCR or laser disc player.
NOTE: Refer to your VCR or laser disc player owner's manual for more information about your equipment's video output
requirements.
NOTE: An image may not be displayed correctly when a Video or S-Video source is played back in fast-forward or fast-rewind
via a scan converter.
S-Video cable
(not supplied)
Video cable
(not supplied)
VCR/ Laser disc player
2. INSTALLATION AND CONNECTIONS
Audio cable
(not supplied)