3
* NEC optional product atttachment.
Do not use this connector unless specified
.
Highest
Stand
Position
USB
Input2 (D-Sub)
Input (DVI)
DC-OUT*
Power
Cord
30° Tilt
DVI
Cable
Display Setup
To attach the MultiSync
®
LCD monitor to your system, follow these instructions:
. Turn off the power to your computer.
2.
For the PC or MAC with DVI digital output
: Connect the DVI signal cable to the
connector of the display card in your system
(Figure 1)
. Tighten all screws.
For the PC with Analog output
: Connect the 5-pin mini D-SUB signal cable to the
connector of the display card in your system
(Figure 2)
. Tighten all screws.
For MAC setup
: Connect the Macintosh cable adapter to the computer, then attach
the 5-pin mini D-SUB signal cable to the Macintosh cable adapter
(Figure 3)
.
Tighten all screws.
NOTE:
To obtain the MultiSync Macintosh cable adapter, call NEC Display Solutions of
America, Inc. at (800) 632-4662.
3. Remove the Connector Cover
(Figure 4)
.
4. Place hands on each side of the monitor to tilt the LCD panel 30-degree angle and
lift up to the highest position
(Figure 5)
.
5. Connect all cables to the appropriate connectors
(Figure 5)
. Using the USB cable,
connect the B type connector to the USB upstream port on the right side of the moni-
tor and the A type connector to the downstream port on the computer
(Figure 5-1)
.
If you can use the cord from the USB device, use one of the downstream ports on the
side of the monitor
NOTE:
If connecting both DVI and D-sub cable, the DVI cable must be connected along
side the rib on the power cord side
(Figure 5)
.
Figure 2
Figure 1
DVI Signal Cable
Figure 3
Macintosh Cable Adapter (not included)
Note: Some Macintosh systems do not require a Macintosh
Cable Adapter
Figure 4
Figure 5-1
Figure 5
Содержание L205GX
Страница 1: ...User s Manual Manuel de l utilisateur MultiSync LCD2070WNX ...
Страница 51: ......