background image

English-12

Specifications for MultiSync LCD2070VX

Monitor Specifications

MultiSync LCD2070VX Monitor

Notes

LCD Module

Diagonal:

51 cm/20.1 inches

Active matrix; thin film transistor (TFT)

Viewable Image Size:

51 cm/20.1 inches

liquid crystal display (LCD); 0.255 mm dot

Native Resolution (Pixel Count):

1600 x 1200

pitch; 300 cd/m

*

3

 white luminance;

800:1 contrast ratio, typical.

Input Signal

Video:

ANALOG 0.7 Vp-p/75 Ohms

Digital Input: DVI-D

Sync:

Separate sync.TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. Positive/Negative
Sync on Green (Video 0.7 Vp-p and Sync. 0.3 Vp-p)*

2

Display Colours

16,777,216

Depends on display card used.

Viewing Angle

Left/Right:

80°/80° (CR > 10)

Up/Down:

80°/80° (CR > 10)

Synchronization Range

Horizontal:

31.5 kHz to 83.0 kHz

Automatically

Vertical:

56.0 Hz to 75.0 Hz

Automatically

Resolutions Supported

720 x 400*

1

 : VGA-Text

Some systems may not support all modes

640 x 480*

1

 at 60 Hz to 75 Hz

listed.

800 x 600*

1

 at 56 Hz to 75 Hz

832 x 624*

1

 at 75 Hz

1024 x 768*

1

 at 60 Hz to 75 Hz

1152 x 870*

1

 at 75 Hz

1280 x 1024*

1

 at 60 Hz to 75 Hz

1600 x 1200 at 60 Hz.................................. Recommended resolution is 60 Hz for

optimal display performance.

Active Display Area

Horizontal:

408 mm/16.1 inches

Vertical:

306 mm/12.0 inches

Power Supply

AC 100-240V ~ 50/60Hz

Power Consumption

44 W

(without optional Sound Bar)

Current Rating

1.05 - 0.55 A

Dimensions

442.0 mm (W) x 388.5-498.5 mm (H) x 220.0 mm (D)
17.4 inches (W) x 15.3-19.6 inches (H) x 8.7 inches (D)

Weight

8.6 kg (19.0 lbs)

Environmental Considerations

Operating Temperature:

5°C to 35°C/41°F to 95°F

Humidity:

30% to 80%

Feet:

0 to 15,000 Feet

Storage Temperature:

-10°C to 60°C/14°F to 140°F

Humidity:

10% to 85%

Feet:

0 to 40,000 Feet

*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on
the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
*2 If your display is not showing a picture of the SOG and Composite Sync. Signal, please contact our hotline for further assistance.
*3 LCD Module at 25°C.

NOTE:

Technical specifications are subject to change without notice.

Содержание L204FY




















Отзывы: