NEC JC-1747UMW, Руководство пользователя

Страница: 10 / 93

Quick Start
To attach the MultiSync E Series monitor to your system,
follow these instructions:
1. Turn off the power to your computer and MultiSync monitor.
2. If necessary, install the display card. For more information, refer to the
display card manual.
3. For the PC: Connect the 15-pin mini D-SUB of the captive signal cable
to the connector of the display card in your system (Figure A.1, A.2).
Tighten all screws.
For the Mac: Connect the MultiSync E750 or MultiSync E950 Macintosh
Cable Adapter (not included) to the monitor connector on the Macintosh
(Figure B.1). Attach the 15-pin mini D-SUB end of the captive signal cable
to the Macintosh cable adapter on the computer (Figure B.1). Tighten all
screws.
4. Connect one end of the
power cord to the
MultiSync E Series monitor
and the other end to the
power outlet (Figure C.1,
C.2).
5. Turn on the monitor
(Figure D.1) and the
computer.
6. This completes the
installation.
NOTE: If you have any
problems, please
refer to the
Troubleshooting
section of this
User's Manual.
15-pin mini D-SUB
Captive Signal Cable
Figure A.2 (E950)
Captive Signal Cable
15-pin mini D-SUB
Figure A.1 (E750)
E - 2