NEC IP3NA-12TXH Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 57

background image

iii

User Safety Protocol

User Safety Protocol

Important

:Read this information before using your IP3NA-12TXH(BT) TEL( ) and IP3NA-

BCH ADAPTER( ).

Read the following instructions to use this product safely and to prevent you and other people
from possible injury, and to protect properties. Improper handling may cause overheating,
explosion, and fire.

Danger

◆

Recharge the battery with the matching battery charger only (see battery label description).

◆

Use the battery only for this IP3NA-12TXH(BT) TEL( ) and IP3NA-BCH ADAPTER( )
system. Do not use it with other electrical devices.

◆

Heed the following warnings to prevent the battery pack from overheating, explosion, and
fire.

・

Do not throw the battery pack into a fire.

・

Do not solder the battery pack directly.

・

Do not short the positive (+) and negative (-) terminal of the battery pack with metal.

・

Do not poke the battery or smash it with a hammer.

◆

Do not disassemble or modify the battery pack. It has a safety circuit and a damaged
circuit may cause overheating, explosion, and a fire.

◆

The internal liquid of the battery pack has strong acid. If the battery liquid gets into your
eye, rinse your eye well with water and consult with a doctor.

◆

Do not use, leave, or recharge the battery pack near fire or under the direct sunlight. High
temperature may damage the internal safety circuit and may cause malfunction of the
recharge, overheating, explosion, or fire.

«
...
3
4
5
6
7
...
»

Содержание IP3NA-12TXH


























































Отзывы:

Нет отзывов

Похожие инструкции для IP3NA-12TXH

Бренд: NEC Страницы: 2

Бренд: 3Com Страницы: 84

SuperStack 3 NBX

Бренд: 3Com Страницы: 496

Бренд: 3CX Страницы: 15

Бренд: Xblue Networks Страницы: 60

Бренд: Xblue Networks Страницы: 2

Бренд: Xblue Networks Страницы: 260

Бренд: Xblue Networks Страницы: 2

Бренд: Panasonic Страницы: 88

DECT 1730 Series

Бренд: Uniden Страницы: 32

T42S-Skype for Business

Бренд: Yealink Страницы: 8

Бренд: AGFEO Страницы: 16

Бренд: Topcom Страницы: 28

Бренд: Hyundai Страницы: 26

Бренд: Serene Страницы: 2

Бренд: Doro Страницы: 20

Бренд: NEC Страницы: 199

Бренд: XTline Страницы: 42

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды