NEC I-Select TW100, Руководство пользователя

Страница: 81 / 140

I-Select TS100 / I-Select TW100 User Guide - Upgrading Your System
4 - 17
Upgrading Microprocessor
Your system is fitted with an AMD (K8) Athlon 64FX processor or an AMD (K8) Ath-
lon 64 processor. This processor is installed in a Socket 939.
Install a processor according to the following procedure.
1. Remove the right side door. See “Removing the Right Side Door” on page 4-4.
2. Disconnect the fan cable from the processor fan connector on the motherboard.
3. Lift the heatsink plastic arms (A).
Figure 4 - 17 : Heatsink Plastic Arms
4. With your finger, gently pull on one of the metallic clips (B) to release the heat-
sink.
Figure 4 - 18 : Heatsink Metallic Clips
5. When both metallic clips are released, lift the heatsink and set it aside.
6. Locate the processor socket.