NEC I-Select TS100, Руководство пользователя

Страница: 55 / 140

I-Select TS100 / I-Select TW100 User Guide - Configuring Your System
3 - 5
Standard CMOS Features Menu
IDE Channel 0 Master/ 0 Slave/ 1 Master/ 1 Slave Submenu
Table 3 - 3: Standard CMOS Features Menu
Feature Choices or
Display Only Description Your Setting
Date MM/DD/YYYY Set the System Date.
Time HH:MM:SS Set the System Time.
IDE Channel 0 Master LITE-ON COMBO
LTC-48
Press Enter to display submenu
IDE Channel 0 Slave None Press Enter to display submenu
IDE Channel 1 Master None Press Enter to display submenu
IDE Channel 1 Slave None Press Enter to display submenu
Drive A None
360K, 5.25”
1.2M, 5.25”
720K, 3.5”
1.44M, 3.5”
2.88M, 3.5”
Allows you to configure floppy
drive A.
Floppy 3 Mode Support Disabled
Drive A
Allows you to enable the Floppy
3 Mode support.
Halt On All Errors
No Errors
All, But Keyboard
All, But Diskette
All, But Disk/Key
Allows you to configure the
system boot stops.
Table 3 - 4: IDE Channel 0 Master Submenu
Feature Choices or
Display Only Description Your Setting
IDE HDD Auto-
Detection
Press Enter Press Enter for the system to
detect hard drive
IDE Channel 0
Master/ 0 Slave/ 1
Master/ 1 Slave
None
Auto
Manual
Allows you to set hard drive
parameters
Capacity Display only Displays the device capacity
Cylinder Display only Displays the device number of
cylinders
Head Display only Displays the device number of
heads
Precomp Display only Displays the device precomp
Landing Zone Display only Displays the device landing
zone
Sector Display only Displays the device number of
sectors