FW version 1.0.4.152
21
Auto-Attended Transfer
.
1.
Set "Auto-Attended Transfer" to "Yes" under
Web GUI
Settings
Call Features
. And then
click "Save and Apply" on the bottom of the page.
2.
Establish one call first.
3.
During the call, press
TRANSFER
key. A new line will be brought up and the first call will be
automatically placed on hold.
4.
Dial the number and press
SEND
key or # to make a second call. (Once the number is
entered, a "Transfer" soft key will show. If "Transfer" soft key is pressed instead of
SEND
key or #, a blind transfer will be performed).
5.
Press
TRANSFER
key again. The call will be transferred;
Cancel Auto-Attended Transfer
.
1.
For Auto-Attended Transfer, after connecting to the second party, a "Split" soft key will
show. To cancel transfer, press "Split" and “EndCall” softkey.
2.
Press
LINE
key on hold, will resume first call talking.
Notes:
To transfer calls across SIP domains, SIP service providers must support transfer across SIP
domains.
The SV9300 cannot
Cancel Auto-Attended Transfer
because
“
Split
”
softkey is not
available.
Conferencing
GT210 can host up to a 3-way conference call.
Initiate a conference call
.
1. Establish calls with 2 parties respectively.
2. While 1 call is active, the other call/calls will be put on hold with its
LINE
key blinking in green.
3. Press
CONFERENCE
key.
4. Press the desired
LINE
key on hold, the conference will be established.
Cancel Conference
.
1.
If after pressing the
CONFERENCE
key, the user decides not to conference, press Cancel
soft key or the current active
LINE
key (LED in solid green);
2.
This will resume the 2-way conversation with the current line.
Hold and Re-conference
.
[SV9500/SV9100/SL2100/SL1000/SL1100]
1.
During the conference, press
HOLD
key.
