FW version 1.0.4.152
15
Making Phone Calls
Handset, Speaker and Headset Mode
The GT210 allows users to switch among handset, speaker or headset when making calls. Press the
Hook Switch to switch to handset; press the
HEADSET
key to switch to headset; or press the
SPEAKER
key to switch to speaker.
SIP Accounts and Lines
GT210 can support 1 SIP account. Each of the
LINE
keys is "virtually" mapped to an individual SIP
account. In off hook state, select an idle line and the dial tone will be heard.
To make a call, select the line you wish to use. The corresponding LINE LED will light up in green. The
user can switch lines before dialing any number by pressing the
LINE
keys.
For example
:
Incoming calls to a specific account will attempt to use its corresponding LINE if it is not in use. When
the "virtually" mapped line is in use, the GT210 phone will flash the other available LINE in red. A
line is ACTIVE when it is in use and the corresponding LED is red.
Completing Calls
There are several ways to complete a call.
On hook dialing.
Enter the number when the phone is on hook and then send out.
1.
When the phone is idle, enter the number to be dialed out.
2.
Take handset off hook; or
Press
SPEAKER
key; or
Press
HEADSET
key with headset plugged in; or
Select an available
LINE
key.
3.
The call will be dialed out.
Off hook and dial.
Off hook the phone, enter the number and send out.
1.
Take handset off hook; or
Press
SPEAKER
key; or
Press
HEADSET
key with headset plugged in; or
Press an available
LINE
key to activate speaker.
2.
You will hear dial tone after going off hook.
3.
Enter the number.
4.
Press
SEND
key or
#
to dial out.
Predictive dialing:
While dialing, the phone will predict and list candidates of the target number
based on the entered digits. If the target
number
exists in the phonebook/call log, the phone will
