NEC Flash Memory Programmer PG-FP3 Скачать руководство пользователя страница 21

Страница: 21 / 95

CHAPTER 2 CONFIGURATION

User's Manual U13502EJ2V0UM00

•

DC JACK

This is the power supply input jack of the PG-FP3. To supply power to the PG-FP3, use the AC adapter supplied

as an accessory.

•

POWER SWITCH

This switch turns power to the PG-FP3 on or off. Before turning power on, make sure that all required parts are

connected correctly.

•

RS-232C CONNECTOR

This connector is used when RS-232C is used as the host interface. Use a commercially available 25-pin

straight cable to connect the host machine and the PG-FP3.

•

PRINTER I/F CONNECTOR

This connector is used when the printer interface cable supplied as an accessory is used as the host interface.

Connect the host machine and the PG-FP3 with the printer cable. Use only the supplied cable. Another cable

may cause the PG-FP3 to malfunction or to be damaged.

•

HOST I/F SELECT SWITCH

This switch selects whether an RS-232C or the printer interface cable is used as the interface with the host

machine. Select an interface before turning on power to the PG-FP3. The selected interface cannot be changed

after power has been turned on.

•

SOCKET OF MASTER ROM

The master ROM socket is used when a user program is downloaded to the PG-FP3 from a source other than

the host machine. A commercially available EPROM can be used as the master ROM. The user program can

be downloaded from an application or in stand-alone mode.

•

MODE KEY

This key is used to select a command mode when the PG-FP3 is used in stand-alone mode. Each time this key

is pressed, the command mode changes.

•

ENTER KEY

This key is used to execute a command selected by the mode key when the PG-FP3 is in stand-alone mode.

Select the command to be executed with the mode key, and press the ENTER key once to execute the

command.

•

TARGET V

SWITCH

This switch selects whether V

is supplied from the PG-FP3 or from the target board. Usually, V

is supplied

from the target board.

Supply V

from the PG-FP3 (TARGET V

: OUT) only when a writing adapter, such as the FA adapter

Note

, is

used.

•

TARGET I/F CONNECTOR

This connector connects the PG-FP3 and the target board. Use the target interface cable supplied as an

accessory to make the connection.

Note

The FA adapter is a product of Naito Densei Machida Mfg. Co., Ltd.

Содержание Flash Memory Programmer PG-FP3
































































































Результаты поиска

Содержание Flash Memory Programmer PG-FP3

Отзывы:

Похожие инструкции для Flash Memory Programmer PG-FP3

Бренды по названию

Популярные бренды

NEC Flash Memory Programmer PG-FP3, Руководство пользователя

Результаты поиска

Содержание Flash Memory Programmer PG-FP3

Отзывы:

Похожие инструкции для Flash Memory Programmer PG-FP3

Бренды по названию

Популярные бренды