Step 5
Turn on the server, and then set up the
OS
Follow the steps below to set up the server.
(1) Turn on a display. Remove peripheral devices except display, keyboard and mouse.
(2) Remove the front bezel.
(3) If the STATUS lamp blinks in green (once per second), wait until it lights up.
(4) Press the POWER Switch on the front panel. After a while, the NEC logo appears on the
display.
Important: If an error message appears on the screen after the power is turned on,
write down the displayed message, and then contact your sales
representative.
(5) Perform one of the following operations depending on the state of the server at the time
of purchase.
If the OS is not pre-installed:
Follow Installation Guide (Windows) to set up the OS.
Tips:
Installation Guide
is available at NEC Web Site
“https://www.58support.nec.co.jp/global/download/”.
Step 6
Install the software.
The following software is provided with this server.
As required, download the Starter Pack from the website below, and install the
software.
http://www.58support.nec.co.jp/global/download/
Name Description
Standard Program Package
Applies the driver to customize the server.
NEC ESMPRO
ServerAgentService
Monitors the server status.
Express Report Service
Informs the support center of the failure
information.
Express Report Service
(HTTPS)
Informs the support center of the failure
information.
RAID Report Service
Manages and monitors the RAID controller.
RESTful Interface Tool
This command line interface tool manages
the system using iLO RESTful API.
Product Info Collection Utility
Collects information for maintenance.
The above software can be installed by using the autorun menu.
Follow the procedure below:
(1) Start Windows installed in the server.
(2) Sign-in to Windows as a user with administrator privileges.
(3) Load the “Starter Pack” DVD into the drive device.
(4) From Explorer, double-click [start_up.bat] under the DVD root folder.
(5) Click
Integrated Installation
or
Applications
on the menu.
Tips: You can refer to the user’s manual of software from “Instruction Manuals” on menu.
(6) Select the software to install.
(7) The software installer starts. Install the software by referring to the
description in the “
Installation Guide
” and other relevant documents.
Trademarks
Microsoft, Windows, and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the
United States and other countries.
All other product, brand, or trade names used in this publication are the trademarks or registered trademarks of their
respective trademark owners.
This guide uses recycled paper.
© NEC Corporation 2020
This document may not be copied or altered without the permission of NEC Corporation.