2. Installation and Connection
Express5800/R120g-2M User’s Guide
132
Chapter 2 Preparations
Note the following precautions to connect cables.
When the device is not Plug and Play device, turn off the server and devices to be connected before
connecting.
If connecting any peripheral device and its interface cable made by other companies (a third party),
contact your sales representative to check if they can be used with the server beforehand.
Fix the power cord or interface cable with cable ties.
Make sure that no pressure is applied on the plug of power cord.
Connecting to Uninterruptible Power Supply (UPS)
2.2.1
To connect the power cord of the server to a UPS, use the connector output on the rear of the UPS. For details,
refer to the manual supplied with the UPS.
When the power cord is connected to a UPS, change the BIOS settings in order to link the server with the power
supply from the UPS.
To change the settings, select
Server
and then
AC-LINK
in BIOS Setup Utility, and change the displayed
parameters. Select
Power On
to perform automatic operations by using the UPS. For details, see
Chapter 3
(BIOS Setup Utility(SETUP))
.
Option slot
Overload protection
reset button
Connector outputs
Input connector
(NEMA5-15P)
Voltage sensitivity setting button
Computer interface port (COM)
TVSS device connector
Example
Universal Serial Bus (USB) port