1. Installing Internal Optional Devices
Express5800/GT110d-S User’s Guide
55
Chapter 2 Preparations
(a) When using on-board RAID Controllers (LSI Embedded MegaRAID
TM
)
By changing the jumper setting for RAID configuration on the motherboard, the internal Hard Disk Drive can
be recognized as a software-controlled RAID System Hard Disk Drive.
Jumper settings on the motherboard and backplane
Change the jumper pin settings as described below.
Jumper pins on motherboard (SWRAID)
Enabled: 2-3 / Disabled: 1-2 (Default value)
Backplane for 2.5-inch Hard Disk Drive (provided with 2.5-inch models) (J7)
1
2
3
1
2
3
N8103-128/129/130/134
On-board SATA
controller
Backplane for 2.5-inch Hard Disk Drives
(Installed on 2.5-inch model as standard)
1
2
3
1
2
3
N8103-128/129/130/134
On-board SATA
controller