1. Installing Internal Optional Devices
Express5800/B120e User's Guide
58
Chapter 2 Preparations
Important Pay attention not to make the air duct hit any electronic component on the CPU
blade.
1.7
Hard Disk Drive (HDD) / Solid State Drive (SSD)
The CPU blade can contain up to two 2.5-inch hard disk drives (SAS/SATA) or solid state drive (SATA). This
section describes SAS hard disk drive as an example.
See the next and the subsequent sections for installation order and installation location.
Important
•
The Hard Disk Drive is extremely sensitive to static electricity. Make sure to
touch the metal frame of the server to discharge static electricity from your
body before handling the Hard Disk Drive. Do not touch the terminals and parts
on the Hard Disk Drive by a bare hand and place the Hard Disk Drive directly
on the desk. For static notes, refer to “Handling precautions (for Anti-static
Measures)”.
•
An optional Hard Disk Drive may contain operating system. Be very careful
when handling the drive.
•
Do not use any Hard Disk Drives not approved by NEC. If an unapproved third
party's Hard Disk Drive is installed in the CPU blade, not only the Hard Disk
Drive but also the CPU blade may be defected.
•
If Hard Disk Drives of different disk capacities co-exist in the CPU Blade, the
system can operate normally. However, to use the Hard Disk Drives in RAID
configuration, use Hard Disk Drives of the same model number.
•
An SSD bracket and screws are not provided with the optional Hard Disk Drive.
Use them that come with the CPU blade.
BP connector
Lever
Hook
Lock
