![background image](http://html1.mh-extra.com/html/nec/express5800-120rh-2/express5800-120rh-2_release-note_4139443005.webp)
Introduction
These System Release Notes cover the following topics:
General Comments
Advisories
Notices and Restrictions
General Comments
The following general comments apply to this server.
Versions of the Network Operating Systems tested and recommended are:
⎯
Windows
®
2003
Microsoft Windows
®
2000 and NT© 4.0 are not supported.
SCO OpenServer
™
5.06 is not supported.
Advisories
EXPRESSBUILDER
The following advisories apply to EXPRESSBUILDER.
Windows 2003 must be installed using EXPRESSBUILDER Express Setup
to take full advantage of NEC specific software for your server.
Note:
This advisory does not apply if your operating
system was preloaded at the factory.
If you already have an operating system installed when creating a
maintenance partition, EXPRESSBUILDER will warn you of the existing
partition. If you want to preserve the installed operating system, do not
create the maintenance partition or the existing operating system will be
overlaid by the maintenance partition.
The Administrator Menu in the System Information Management segment
of the Offline Maintenance Utility is accessible only by NEC authorized
service representatives.
EXPRESSBUILDER operates in floppy emulation mode. The emulated
floppy drive portion of your system CD-ROM is designated Drive A and the
remaining portion(s) of the CD-ROM is designated Drive Q. Your system
diskette drive is Drive B. After creating the Off-line Maintenance Utility
diskette, EXPRESSBUILDER prompts you to remove the diskette from
Drive B. At this prompt, remove the diskette from your diskette drive.
Express5800/120Rh-2 System Release Notes 3