NEC Express5800/120Rf-1, Руководство по эксплуатации, Страница: 19 / 21

NEC Express5800/120Rf-1,120Rh-2 Operation Manual for Microsoft®Windows Server™ 2003 x64 Editions
19
8. In the [Paging file size for selected drive] box, change [Initial Size] to the
[Recommended] value or more and click [Set].
IMPORTANT
• The above paging file size is a recommended size for
collecting debug information (dump file). For the boot
volume, a paging file having an initial size sufficient for
storing the dump file is required. If the paging file becomes
insufficient, collection of correct debug information may fail
because of virtual memory shortage. Set an enough paging
file size for the entire system.
•
For "Recommended", see "Size of a Created Partition".
•
When memory has been expanded, set the paging file again
according to the memory capacity.
•
We recommend checking in advance by pressing the dump
switch to confirm that dump is collected normally in case a
failure occurs.
9. Click [OK].
Depending on the change made, a message may be displayed asking you to restart
the system.
Restart the system according to the message.
Setting Dr. Watson
Dr. Watson is a debugger for application errors. When detecting an application error, Dr.
Watson diagnoses the system and records diagnostic information (log). Follow the
steps below so that diagnostic information can be collected:
1. Click [Run] in the start menu.
2. In the [Open] box enter "drwtsn32.exe", and click [OK].
The [Dr. Watson for Windows] dialog box is displayed.
3. In the [Log File Path] box, specify the storage destination of diagnostic information.
Information is stored under the file name "DRWTSN32.LOG".
CHECK No network path can be specified. Specify a path on the local
computer.
4. In the [Crash Dump] box, specify the storage destination of the crash dump file.
TIPS The crash dump file is a binary file that can be read with Windows
Debugger.
5. In the [Option] box, check the following checkboxes:
Dump Symbol Table
Dump All Thread Contexts
Add To Existing Log File
Create Crash Dump File
For information about these functions, refer to the online help.
6. Click [OK].