NEC EXPRESS5800/120Ef, Руководство по обслуживанию, Страница: 29 / 64

CHAPTER 4
TROUBLESHOOTING
If your NEC Express server does not operate as expected, read this chapter before assuming a
failure.
NOTE: Troubleshooting and POST error message refer to
the Users Guide.
POST Error Message List
On-screen error message Description Cause Action
0200 Failure Fixed Disk Hard disk failure 1. The setting mistake
of an setup
2. Fault HDD
3. Fault Mother Board
1.A check of an setup
2.HDD exchange
3.Mother board exchange
0210 Stuck Key Keyboard connection
error Poor keyboard
connection
1. It remarries out
[keyboard connection].
2. Keyboard exchange
3. Mother Board Exchange
0211 Keyboard error Keyboard error Fault Keyboard Connection check
0212 Keyboard controller
Failed
Keyboard controller
failure Fault Keyboard
controller 1. Connection Check
2. Re-Starting
3. Mother Board Exchange
0213 Keyboard locked -
Unlock key switch
Keyboard is locked. Keyboard is locked. Keyboard lock release
0220 Monitor type does not
match CMOS - Run
SETUP
The monitor type is not
consistent with the
CMOS data. Monitor type setting
mistake
1. Get-Default-Perform by
Setup.
2. COMS clearance
0230 System RAM Failed
at offset
System RAM error.
0231 Shadow Ram Failed at
offset
Shadow RAM error.
0232 Extended RAM Failed
at address line
Extended RAM error,
Fault DIMM 1. DIMM Exchange
2. Mother Board Exchange
0250 System battery is dead
- Replace and run
SETUP
The system battery is
worn out. The battery piece of
NV-RAM
Mother Board Exchange
0251 System CMOS
checksum bad -
Default configuration
used
The system CMOS
checksum is incorrect. Fault NVRAM 1. Setup Re-Setup
2. Mother Board Exchange
0252 Password checksum
bad - Passwords
cleared
The checksum of a
password is inaccurate.
Password clearance
Setup Re-Setup
23