NEC Express5800 120Ed, Руководство по установке

Страница: 12 / 29

Express5800/120Ed Rack Mount installation Procedures 10
Figure 5. Removing the LED Holder Assembly
5. Tag and remove the Power and HDD LEDs from the top and bottom sockets
of the LED holder (see Figure 6).
Power
HDD
Figure 6. Removing LEDs from the LED Holder
6. Feed the Power and HDD LED cable assemblies back through the mounting
hole in the front of the chassis.
7.
Reroute the power and HDD LEDs through hole on the right side of the
chassis, then into the new LED holder mounting hole slot located on the
front right-hand side of the chassis. See Figure 8.