![background image](http://html.mh-extra.com/html/nec/express5800-110ri-1/express5800-110ri-1_user-manual_251179081.webp)
Setting Up Your Server 3-23
TURNING ON THE SERVER
Turn on the server and follow the on-screen instructions for setup.
IMPORTANT:
Before turning on the server:
Some optional boards require setups with the BIOS setup utility
before installation. If the server has a PCI board with the PCI-to-
PCI bridge installed, the BIOS setup utility is enabled to launch.
Check on the board specifications to find out whether it requires
pre-installation setups before actually installing the board.
Some installed optional devices or connected peripheral devices
require setups before proceeding to the next step.
To use the server with no optional devices installed besides the graphic
board, install a desired OS to the server.
Pressing the POWER switch at the front of the server turns on the server.
1.
Make sure that the floppy disk drive contains no floppy disk.
2.
Power on the video display and any other external devices.
NOTE:
If the power cord is connected to the power control unit such
as the UPS, turn on the power control unit.
3.
Remove the front bezel if installed.
4.
Press the POWER switch.
The POWER LEDs on the front and the rear of the server come on green. In a few
seconds, the NEC logo appears on the screen.
NOTE:
Connect the power cord and wait about five seconds before
pressing the POWER switch. The POWER switch does not work in a
few seconds after connecting the power cord due to firmware start-up.
POWER switch
POWER LED
Содержание Express5800/110Ri-1
