NEC Express 5800/140Rb-4, Руководство по обслуживанию

Страница: 129 / 145

Error Code and Message Description Action
firmware
corrupted firmware corrupted again to start the server. If the error cannot be
corrected, contact your service representative.
0B92 Internal Use
Area Error Internal Use Area of
BMC FRU corrupted All the commands and functions other than the FRU
command and the EMP function can be used. This
is not a fatal error. Turn off the power once and then
on again to restart the server. If the error cannot be
corrected, contact your service representative.
0B93 BMC SDR
Repository
empty No BMC SDR data
exists Turn OFF server power source once and then on
again to start the server. If the error cannot be
corrected, contact your service representative.
0B94 IPMB Error IPMB signal lines do
not respond All the functions other than the function of accessing
to SMC through IPMB can be used. This is not a
fatal error. Turn off the power once and then on
again to restart the server. If the error cannot be
corrected, contact your service representative.
0B95 BMC FRU
device failure Access to SROM
that contains the
chassis information
failed All the functions other than the function of accessing
to SMC through IPMB can be used. This is not a
fatal error. Turn off the power once and then on
again to restart the server. If the error cannot be
corrected, contact your service representative.
0B96 BMC SDR
Repository
failure Access to FMEM
sector that contains
SDR information
failed
0B97 BMC SEL
device failure BMC SEL device
failure
0B98 BMC RAM test
error BMC RAM test error
0B99 BMC Fatal
hardware error BMC Fatal hardware
error
0B9A Management
Controller error Management
Controller not
responding
0B9B Private I2C error Private I2C bus not
responding
0B9C BMC
internalexceptio
n BMC internal
exception
0B9D BMC A/D
timeout error BMC A/D timeout
error
0B9E SDR repository
corrupt SDR repository
corrupt
0B9F SEL corrupt SEL corrupt Turn OFF server power source once and then on
again to start the server. If the error cannot be
corrected, contact your service representative.
0BB0 SMBIOS –
SROM data Read error of SROM
data