NEC EXPRESS 320Lb, Руководство пользователя, Страница: 55 / 181

2-8 Setting Up the System
WARNING
Observe the following instructions to use the server safely. Failure to follow
these instructions could lead to a death or serious injury.
■
Do not install the equipment in non-designated places.
■
Do not connect the ground wire to a gas pipe.
CAUTION
Observe the following instructions to use the equipment safely. Failure to follow
these instructions may cause a burn, personal injury, or damage to physical
assets.
■
Do not carry or install the equipment alone.
■
Do not install the equipment in such a manner that its weight is imposed on a
single place.
■
Do not assemble or disassemble parts alone.
■
Do not pull a device out of the rack if it is unstable.
■
Do not leave two or more devices pulled out from the rack.
■
Do not install excessive wiring.
Do not install the server in the locations as listed below. Otherwise, the server
may malfunction.
!
A location where temperatures change widely (near a heater, air
conditioner, or refrigerator).
!
A location that is subject to intense vibration.
!
A location where corrosive gas (sodium chloride,
sulfur dioxide, hydrogen
sulfide, nitrogen dioxide, or ozone)
is generated, or a location that is close to
chemicals or exposed to chemicals.
!
A location whose floor is covered with non-antistatic carpet.
!
A location that may be subject to falling objects.
!
A location where you may step or trip on the power cords or interface
cables.
!
A location that is close to equipment that generates intense magnetic field
(e.g., TV set, radio, broadcasting/communications antenna, power
transmission wire, and electromagnetic crane). (If unavoidable, contact
your sales agent to request proper shield construction.)
!
A location where the power cord of the server must be connected to an
AC outlet that shares the outlet of another device using large power
consumption.