NEC EA294WMi-BK, Руководство пользователя

Страница: 13 / 30

English-11
English
Controls
OSD (On-Screen Display) control keys on the front of the monitor function
are as follows:
To access OSD menu, touch any of the control keys.
To change signal input, touch the SELECT key.
NOTE: Exit OSD in order to change signal input.
1 AmbiBright Sensor
Human
Sensor
Detects the level of ambient lighting, allowing the monitor to make adjustments to various
settings resulting in a more comfortable viewing experience. Do not cover this sensor.
2 LED Indicates that the power is on or off.
3 Power Turns the monitor on and off.
4 INPUT/SELECT Enters the OSD Control menu. Enters OSD sub menus.
Shows a switching menu of input source when not in the OSD menu.
5 MENU/EXIT Accesses OSD menu. Exits the OSD sub menu. Exits OSD Control menu.
Hold the button for a few seconds when not in the OSD menu to activate RESTORE in
CUSTOMIZE SETTING.
6 LEFT/RIGHT Navigates to the left or right through the OSD Control menu.
You can adjust the BRIGHTNESS directly while the OSD menu is off*
1 .
7 UP/DOWN Navigates up or down through the OSD Control menu.
You can adjust the VOLUME directly when not in the OSD Control menu*
1
.
8 PBP/RESET Resets the OSD controls back to factory settings.
Activates the Auto Adjust function if held for 3 seconds while the OSD menu is off
(analog input only)*
1
.
Selects PBP MODE when OSD menu is off* 2 .
*
1
When HOT KEY function is OFF, this function is disabled.
*
2
PBP MODE menu.
Touch the LEFT/RIGHT to select a single or a priority (adjustable) screen of split screen. When PBP MODE is OFF, a single
screen will be displayed.