manualshive.com logo in svg

NEC E705, Руководство пользователя

Поделиться
Скачать
NEC E705 Скачать руководство пользователя страница 9

English-7

English

5. Ventilation Requirements 

When mounting in an enclosed space or recessed area, 
leave adequate room between the monitor and the enclosure 
to allow heat to disperse, as shown below.

Allow adequate ventilation or provide air conditioning around 
the monitor, so that heat can properly dissipate away from 
the unit and mounting apparatus; especially when you use 
monitors in multiple screen.

NOTE: 

The sound quality of the internal speakers will 
differ according to the acoustics of the room.

6. Prevent Tipping

When using the display with the optional table top stand 
fasten the LCD to a wall using a cord or chain that can 
support the weight of the monitor in order to prevent the 
monitor from falling. Fasten the cord or chain to the monitor 
using the provided clamps and screws are included with the 
optional table top stand.

Screw (M4)

Cord or chain

Clamp

400 mm

Screw Holes

Before attaching the LCD monitor to the wall, make sure that 
the wall can support the weight of the monitor.

Be sure to remove the cord or chain from the wall before 
moving the LCD.

Содержание E705





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды