Registering a DECT Handset on the DXE96+
17
Wait
Esc
Enter PIN
OK Esc
****
The display will show
Enter the 4 digit AC code (displayed at
the keytelephone) with the keypad
The display will show a * for each digit entered.
Press the OK soft key
The display will show
If the signal strength bars are not displayed
you must move to an area that is within range of
a DECT base station.
If the signal strength bars appear for a few
seconds and then go off you may have entered
the AC code incorrectly. Press the ESC soft key
and try again.
The display will show
After a few seconds the display will show
Enter your company name using the
keypad.
The name can be up to 16 characters long.
3103:Port017 AC:1234
Registrating.
Enter System Name
Esc
_
3103:Port017 AC:1234
Completed.
