NEC DS1-MP10RX2, Важная информация

Страница: 21 / 204

ENG-11
DETAIL SETTINGS ( SMART CONNECTION )
Item Description Remarks
PIN TYPE - ONE-TIME
The PIN CODE is automatically created every time
stopping to access to the network.
- STATIC
Set up random number for the PIN CODE .
- The default factory setting Is [ ONE-
TIME ].
SECURITY TYPE Select this when [ ONE-TIME ] is set for PIN TYPE .
- SIMPLE
Consists of 8 digits number which is two times
repetition of the PIN CODE .
- RANDOM
Automatically create eight digits security key.
SECURITY KEY Set this when [ STATIC ] is selected for PIN TYPE . - Consists of 8 to 63 alphanumeric char-
acters.
PIN CODE Set this when [ STATIC ] is selected for PIN TYPE . - Four numbers
CHANNEL Select a wireless channel. - The default factory setting is “6”.
DETAIL SETTINGS ( INFRASTRUCTURE )
Item Description Remarks
SITE SURVEY • Run the site survey and display the detected ac-
cess points.
• The maximum of 64 access points can be dis-
played.
• Only one access point with the same name as SSID
is displayed.
• The applicable access points are the securitydis-
abled WPA-PSK, WPA2- PSK.
• A “Key” mark is attached when the security setting
of the access point has been enabled.
Note: If any access point is not detected,
select [
SITE SURVEY ] again after selecting
[ RECONNECT ] on the WIRELESS LAN SET-
TING screen.
SECURITY SETTING Select security type.
- [
DISABLE ]
Disable the security setting.
- WPA2-PSK
Input column for the security key is displayed.
- WPA/WPA2-PSK
Input column for the security key is displayed.
- The default factory setting is [ DISABLE ].
- The security key consists of 8 to 63
alphanumeric characters.
SSID Set the SSID - The default factory setting is “NECDS”.
- SSID consists of 1 to 32 alphanumeric
characters.