NEC Direction SP200T, Руководство пользователя

Страница: 34 / 124

2-14 Setup Utility
„
Clear All DMI Event Logs
This option clears the DMI Event Log after rebooting the system. Choose “No”
or “Yes.”
„
Event Logging
This option enables logging of DMI Events. Choose “Disabled” or “Enabled”
(default).
„
Mark DMI Events as Read
This option is used to mark off all DMI Events as read. If necessary, press the
Enter key to access the Confirmation dialog box and confirm your preference.
To return to the Advanced Menu, press the Esc key. Then press the right arrow (cursor)
key to move to the Security Menu.
SECURITY MENU
The Security Menu can be used to set a user password and/or a supervisor password.
A User Password controls access to the system and Setup Utility program at boot up. If the
User Password feature has been enabled, you need to enter your User password correctly
whenever you boot the system before you can use it.
A Supervisor Password controls access to the BIOS and Setup Utility program. If the
Supervisor Password feature has been enabled, a Supervisor password must be entered
correctly before all options in the Setup Utility program are available (for example, to
disable password protection).
Press the right arrow (cursor) key to move to the Power Menu.
POWER MENU
The Power Menu can be used to enable or disable the system’s power management
features. When the power management option is enabled, the following options appear in
the Power Menu:
„
Inactivity Timer
The Inactivity Timer lets you set the delay time for activation of power
management. Standby mode powers down various devices in the system until you
resume using it. You can select from “Off,” “1,” “2,” “4,” “6,” “8,” “12” or “16
minutes.” A setting of
1 minute achieves maximum power savings, while a setting of 16 minutes allows
maximum performance.