NEC Direction SP200T, Руководство пользователя

Страница: 116 / 124

System Resources C-3
Figure C-1 System Board Configuration Jumpers
4.
Set the processor and host bus frequency jumpers according to the documentation
supplied with the upgrade processor and the following.
Change the jumper setting by lifting the plastic block and placing it on the
appropriate pins.
200 MHz processor
Host Bus PCI Bus ISA Bus Bus/Processor
(J9C1-C) (J9C1-D) Freq. Freq. Freq. Freq. Ratio
5-6 1-2, 5-6 66 MHz 33 MHz 8.33 MHz 3
233 MHz processor
Host Bus PCI Bus ISA Bus Bus/Processor
(J9C1-C) (J9C1-D) Freq. Freq. Freq. Freq. Ratio
5-6 1-2, 4-5 66 MHz 33 MHz 8.33 MHz 3.5
5.
Check that the settings are correct.
6. Reinstall any removed expansion boards (see Section 3, “Expansion Board
Installation”).
7.
Replace the system access cover (see Section 3, “Replacing the Access Cover”).
8.
Power on the system.