Installing Options 5-35
2.
Press the front panel squarely into position until the tabs
lock the panel in place.
3.
Replace the access cover (see “Replacing the Access
Cover”).
4.
After securing your system, reboot it and run the Setup
program to set the new configuration.
EXTERNAL OPTIONS
This subsection includes installation procedures for the
following external options:
parallel printer
serial devices.
Connecting a Parallel Printer
NOTE
Before connecting a printer to the system, be
sure the printer is set up correctly. Follow the setup
instructions that came with the printer.
Connect a parallel printer to the system as follows.
1.
Turn off power to the system and printer.
2.
Connect the printer cable to the printer port on the rear
of the system unit (see the following figure).
3.
Secure the cable with the screws provided.
4.
Connect the other end of the cable to the printer.
5.
Turn on the printer and the computer.
Содержание DIRECTION SP - SERVICE
Страница 9: ...x Contents ...
Страница 22: ...1 8 Introducing Your Computer Audio connectors desktop models Rear features minitower models ...
Страница 55: ...3 8 Understanding System Features Video Diamond Monster 3D II 3Dfx Voodoo II 3D ...
Страница 121: ...Installing Options 5 37 Locating the serial port ...