manualshive.com logo in svg

NEC DIRECTION SP - SERVICE, Руководство пользователя

Поделиться
Скачать
NEC DIRECTION SP - SERVICE Скачать руководство пользователя страница 1

First Printing — August 1998

Copyright 1998

NEC Computer Systems Division

Packard Bell NEC, Inc.

1 Packard Bell Way

Sacramento, CA   95828-0903

All Rights Reserved

PROPRIETARY NOTICE AND LIABILITY DISCLAIMER

The information disclosed in this document, including all designs and related
materials, is the valuable property of NEC Computer Systems Division, Packard
Bell NEC, Inc. (hereinafter “NEC CSD”) and/or its licensors. NEC CSD and/or
its licensors, as appropriate, reserve all patent, copyright and other proprietary
rights to this document, including all design, manufacturing, reproduction, use,
and sales rights thereto, except to the extent said rights are expressly granted to
others.

The NEC CSD product(s) discussed in this document are warranted in accordance
with the terms of the Warranty Statement accompanying each product. However,
actual performance of each such product is dependent upon factors such as system
configuration, customer data, and operator control. Since implementation by
customers of each product may vary, the suitability of specific product
configurations and applications must be determined by the customer and is not
warranted by NEC CSD.

To allow for design and specification improvements, the information in this
document is subject to change at any time, without notice. Reproduction of this
document or portions thereof without prior written approval of NEC CSD is
prohibited.

As an ENERGY STAR partner, NEC Computer Systems Division (NEC CSD) has determined that this

product meets the ENERGY STAR guidelines for energy efficiency.

FaxFlash is a service mark of NEC Computer Systems Division, Packard Bell NEC, Inc.

Direction is a trademark of Packard Bell NEC, Inc.

NEC and MultiSync are registered trademarks of NEC Corporation, used under license.

ENERGY STAR is a U.S. registered trademark.

All other  product, brand, or trade names used in this publication are the trademarks or registered

trademarks of their respective trademark owners.

Содержание DIRECTION SP - SERVICE
































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды