Disassembly and Reassembly 5-7
4.
Slide the 3 1/2-inch hard disk bracket towards the back of the system unit until it
is free of the molded plastic.
5.
Remove the screw on the side of the hard disk securing it to the bracket.
Figure 5-7 Removing the Securing Screw
6.
Slowly pull the hard disk away from the bracket and lift the disk out of the two
securing tabs on the opposite side of the bracket.
Standard 3 1/2-Inch Hard Disk Drive Removal
Remove the standard 3 1/2-inch hard disk drive as follows.
1.
Remove the system access cover and front panel as previously described.
2.
Unplug the hard disk drive power and signal cables from the optional hard disk
drive.
3.
Locate the two screws securing the 3 1/2-inch hard disk drive in the molded
plastic cage at the front of the system. Remove the screws.
4.
Release the two plastic clips inside the plastic cage holding the drive in place and
slide the drive up and out of the cage.
