NEC Conference Max Plus
— User Options
11
NEC Conference Max Plus
— User Options
10
Tones and alerts
To program Conference number
1.
Press and hold
REDIAL/PROG
until the Program icon appears on the LCD screen.
2. Press
5
to enter the Conference menu.
3. Press
REDIAL/PROG
.
4. Enter the phone number.
Note:
To add a pause to the phone number, press and hold the pound (#) key. To add a dash
to the phone number, press and hold the 1 key.To add a space to the phone number, press and
hold the star key (*).
5. Press
REDIAL/PROG
to save the number. Press
CLEAR
to exit.
Note
: If a number has already been programmed, use CLEAR to delete the old number
before entering the new number.
To program service center number
1.
Press and hold the
REDIAL/PROG
key until the Program icon appears on the LCD
screen.
2. Press
6
to enter the service center menu.
3. Press
REDIAL/PROG
.
4. Enter the number you want the 0 key to dial.
Note:
To add a pause to the phone number, press and hold the pound (#) key. To add a dash
to the phone number, press and hold the 1 key.To add a space to the phone number, press and
hold the star key (*).
5. Press
REDIAL/PROG
to save the number. Press
CLEAR
to exit.
Note
: If a number has already been programmed, use CLEAR to delete the old number
before entering the new number.
To program the Automatic Gain Control (AGC)/
Automatic Level Control (ALC) settings
1. Press and hold the
REDIAL/PROG
key until the Program icon appears on the LCD screen.
2. Press
8
to enter the AGC/ALC menu. The current setting
is displayed on the LCD screen.
3. Press
REDIAL/PROG
. The current setting flashes.
4. Enter the new setting. Refer to the table at right.
5. Press
REDIAL/PROG
to confirm selection. Press
CLEAR
to exit.
Note
: The default AGC/ALC setting is 1.
To restore factory defaults
1.
Press and hold the
REDIAL/PROG
key until the Program icon appears on the LCD
screen.
2. Press and hold the
9
key. The number 8 will be displayed across the LCD screen.
3. Press
REDIAL/PROG
to confirm selection. Press
CLEAR
to exit.
Tone/Alert
Description
Not powered
Confirmation
Reject
Low Battery
Out of Range
Paging
If the base unit is not powered, you will hear a beeping sound
when you press the Phone key.
A tone will play upon successful programming entry.
A tone will play if you attempt to do any of the following:
• enter an invalid programming entry
• use a speed dial key that has not been programmed
(One-Touch Conferencing or service center)
• enter a 45th digit when predialing
• enter a 17th digit for user phone number
• enter a 31st digit for speed dial key (One-Touch
Conferencing or service center)
An alert will sound every 60 seconds when batteries require
charging and conferencing pod is in Phone mode.
An alert will sound every 30 seconds when conferencing pod is
too far from base unit and in Phone mode.
When the Page button on the base unit is pressed, the
conferencing pod will beep loudly for 30 seconds or until any
key on the keypad is pressed.
Speaker
AGC
Microphone
ALC
Setting
2
1
On
On
On
Off
3
On
Off
4
Off
Off
Содержание Conference Max Plus
Страница 1: ...NEC Conference Max Plus ...
