NEC Conference Max Plus, Руководство пользователя

Страница: 4 / 10

3. Connect the power adapter to the conferencing pod and plug it into an electrical outlet. This
will charge the batteries. Batteries must be charged at least 15 hours prior to first use.
4. Connect one end of the telephone cable into the phone jack on the back of the base unit
and the other end into a wall jack.
5. Connect a recording device to the 2.5mm mono audio jack (if desired).
6. Connect the base unit to the power cord and plug the power cord into an electrical outlet.
• Do not store this product or the battery pack in a high temperature area. Battery packs
stored in a freezer or refrigerator should be protected from condensation during storage
and defrosting. Battery packs should be stabilized at room temperature before using.
• Your battery pack is rechargeable and can be recycled once it outlives its usefulness.
Depending upon your local and state law, it might be illegal to dispose of this battery into a
municipal waste system. Check with your local solid waste company for more information
on your recycling options for the battery pack.
Save these instructions
!
Getting Started
CAUTION : Use only the battery pack that came with this unit. Replace only with a same or
equivalent type recommended by manufacturer. There is risk of explosion if battery is
replaced by an incorrect type.
MAX Plus Wireless
Pod Unit
Cable Retainer Unit
Figure 3. Connecting power supply
Paging button
In Use and
Power LEDs
Figure 4. Connecting the base unit
!
CAUTION : Use only the power adapter that came with this unit. Using other adapters may
damage the unit.
Connecting your conferencing phone
1. Slide the cover off the battery compartment on the bottom of the pod.
2. Connect the battery pack plug into the port in the compartment, insert the battery pack,
and slide the cover back into place.
Figure 2. Connecting the battery
NEC Conference Max Plus — Getting Started
5
NEC Conference Max Plus — Getting Started
4