22
2. Installation and Connection
2-2. Connecting the Power Cable
The power cable is not included with the projector. Use a power cable that meets the standards and power supply voltage of the
country where you are using the projector. Ask your dealer for the power cable to select and purchase.
WARNING
Carefully read the contents described in this section before connection and connect the cables according to the proper proce-
dure. Inappropriate handling may cause fatal, serious or other bodily injuries due to fire or electric shock.
CAUTION
• Before connecting the power cables, check that the main power switch of the projector is turned off. Implement the connec-
tion with AC power shut off.
• Be sure to ground the equipment to ensure safety. Use a power cable that meets the standards and power supply voltage of
the country where you are using the projector (page 69), and always connect the equipment to the ground. If the ground
is not connected, it may cause electrical shocks.
• When connecting the power cable plugs to the AC IN and the electrical outlet, securely insert the plugs all the way in. If the
connection between the power cable plug and the electrical outlet is loose, the plug area may generate heat, causing burns
and accidents.
If the power cord is not connected to the earth, it may cause electric shock. Please make sure the power cord is connected to
the wall outlet directly and earthed properly. Do not use a 2-pin plug converter adapter.
CAUTION
• This equipment is designed to be used in the condition of the power cord connected to earth. If the power cord is not con-
nected to the earth, it may cause electric shock. Please make sure the power cord is earthed properly.
NOTE
• Install the electric outlet nearby the projector main unit so that the power supply can be cut by unplugging the AC
power cable.
• When plugging in or unplugging the AC power cable, make sure that the main power switch is pushed to the [O]
position. Failure to do so may cause damage to the projector.
• Do not use a three-phase power supply. Doing so may cause malfunction.
