NEC AccuSync AS193i, Руководство пользователя

Страница: 13 / 17

English
English-11
Specifications
Monitor Specifications AccuSync AS193i Monitor
Notes
LCD Module Diagonal: 48.0 cm/19 inches Active matrix, thin film transistor (TFT)
liquid crystal display (LCD); 0.2928 mm
dot pitch; 250 cd/m
2
white luminance,
1000:1 contrast ratio, typical.
Viewable Image Size: 48.0 cm/19 inches
Native Resolution (Pixel Count): 1280 x 1024
Input Signal 15pin Mini D-sub: Analog RGB 0.7 Vp-p/75 ohms
Sync Separate sync. TTL level (Positive/Negative)
DVI-D Digital RGB
DVI(HDCP)
Display Colors 16,777,216 Depends on display card used.
Viewing Angle Left/Right: -89°/+89° (CR>10)
Up/Down: -89°/+89° (CR>10)
Synchronization Range Horizontal: 31.5 kHz to 81.1 kHz Automatically
Vertical: 56 Hz to 76 Hz
Automatically
Resolutions Supported Landscape: 720 x 400* 1 : VGA text
640 x 480* 1 at 60 Hz to 75 Hz
800 x 600* 1 at 56 Hz to 75 Hz
832 x 624* 1 at 75 Hz
1024 x 768* 1 at 60 Hz to 75 Hz
1152 x 864*
1
at 75 Hz
1152 x 870*
1
at 75 Hz
Some systems may not support all modes
listed.
1280 x 960*
1
at 60 Hz to 75 Hz
1280 x 1024*
1
at 60 Hz to 75 Hz.................
Recommended resolution is 60 Hz for
optimal display performance.
Active Display Area Horizontal: 374.78 mm
Vertical: 299.827 mm
Power Supply 100 - 240 V ~ 50/60 Hz
Current Rating 0.45 - 0.25 A
Power Maximun Operation: 18 W
Consumption Normal Operation: 14 W
Dimensions Landscape: 408.0 mm (W) x 386.4 mm (H) x 213.9 mm (D)
16.1 inches (W) x 15.2 inches (H) x 8.4 inches (D)
Weight 3.9 kg (8.6 lbs)
Environmental Considerations
Operating Temperature:
Humidity:
Altitude:
Storage Temperature:
Humidity:
Altitude:
5°C to 35°C/41°F to 95°F
20% to 80%
0 to 2,000 m/0 to 6,562 Feet
-10°C to 60°C/14°F to 140°F
10% to 85%
0 to 12,192 m/0 to 40,000 Feet
*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal
and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen
is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE: Technical specifications are subject to change without notice.