© NEC Corporation 2019 15
3.1
Before Mounting the LED Poster
Before starting the installation, consider the following topics to ensure safe and convenient
installation and operation of the LED Poster.
Mounting Location
3.1.1
Table 9: Mounting Location
Location
Dos
Don’ts
Operation
environment
Install and use the unit indoors.
Do not use the unit outdoors.
Install the unit on a place, which
offers enough space for
ventilation.
Do not install the unit close to
door or gate.
Choose a location which is dry,
free of vibrations and dust.
Do not install in areas where the
unit will be subjected humidity,
to strong vibrations and dust.
Do not install or use the unit
close to water.
Make sure, that people are not
able to grab and hang onto the
unit or the mounting equipment.
Do not install the unit in a
location where people can easily
grab and hang onto the unit or
the mounting equipment.
Mounting
Adhere to the ventilation
specifications. For more
information, see 2.4 Ventilation
Do not cover or block the vents
on the LED Poster rear panel.
Do not place the LED Poster
close near a radiator or other
heat source.
Do not use the LED Poster in high
temperature, humid, dusty or
oily areas.
Install the unit only on ceilings or
walls, which are strong enough
to support the unit and the
mounting accessories.
Do not mount the unit on
hanging fixtures.
Mount the unit to a solid
structure within the ceiling, such
as a support beam.
Mount the LED Poster so the
display is in a vertical position,
upright, and the bottom part
lower than the top.
Do not mount this product face
up, face down, or upside down
for an extended period of time as
it may cause permanent damage
to the screen.
Power
connection
Install the LED Poster close to a
power outlet that is easily
accessible.
Do not install the unit next to a
location where the main power
supply is fed into the building.
