NEC 78K0/L 3 - See it! Series, Руководство пользователя

Страница: 43 / 82

78K0/Lx3 - See it!
User’s Manual U18759EE2V0UM00
43
7.5 Confirmation of USB Driver Installation
After installing the two types of drivers, check that the drivers have been installed normally,
according to the procedure below. When using the
78K0/Lx3 - See it! board in combination
with the IAR C-SPY debugger and the WriteEZ3 FLASH programming GUI, the information to
be checked here is needed.
By clicking the "Device Manager" tab, check that the drivers are installed normally.
Figure 33: Device Manager
For Windows 98SE/Me
Caution Do not select Update and Erase when communicating with the target
device.
For Windows 2000/XP
Caution Do not perform "Hardware Modification Scan" when communicating with the target
device.
Remark In the GUI port list box, the same communication port as COM? of USB Serial Port
(COM?) needs to be selected.
If the drivers above are not displayed, or the mark "
×
" or "!" is prefixed, refer to
CHAPTER 10 TROUBLESHOOTING .
Check that "USB Serial Port
(COM?)" is present.
Check that "USB High Speed
Serial Converter" is present.